<?XML Version="1.0">
<nidocument>
<nicomment>
LabVIEW error file
</nicomment>
<nierror code="-23096">
Analysis:  Too many decimal points
</nierror>
<nierror code="-23095">
Analysis:  Not a valid function
</nierror>
<nierror code="-23094">
Analysis:  Incomplete function expression
</nierror>
<nierror code="-23093">
Analysis:  Incomplete expression
</nierror>
<nierror code="-23092">
Analysis:  Variables output problem
</nierror>
<nierror code="-23091">
Analysis:  Inconsistency in variables or numbers
</nierror>
<nierror code="-23090">
Analysis:  Contains more than one variable
</nierror>
<nierror code="-23089">
Analysis:  Contains variables
</nierror>
<nierror code="-23088">
Analysis:  Wrong variable name
</nierror>
<nierror code="-23087">
Analysis:  Wrong letter
</nierror>
<nierror code="-23086">
Analysis:  Wrong function call
</nierror>
<nierror code="-23085">
Analysis:  Wrong number format
</nierror>
<nierror code="-23084">
Analysis:  Wrong decimal point
</nierror>
<nierror code="-23083">
Analysis:  Bracket problem at the end
</nierror>
<nierror code="-23082">
Analysis:  Bracket problem at the beginning
</nierror>
<nierror code="-23081">
Analysis:  Bracket problem
</nierror>
<nierror code="-23055">
Analysis:  Argument out of range [0,1)
</nierror>
<nierror code="-23054">
Analysis:  Non-unique variables
</nierror>
<nierror code="-23053">
Analysis:  Signal length not a power of two and >= 4
</nierror>
<nierror code="-23052">
Analysis:  Signal length not a prime and >= 5
</nierror>
<nierror code="-23051">
Analysis:  Signal length not a power of two
</nierror>
<nierror code="-23050">
Analysis:  Signal length not a multiple of number
</nierror>
<nierror code="-23049">
Analysis:  Invalid window length
</nierror>
<nierror code="-23048">
Analysis:  Invalid time increment
</nierror>
<nierror code="-23047">
Analysis:  Argument out of range [0,100]
</nierror>
<nierror code="-23046">
Analysis:  Empty array
</nierror>
<nierror code="-23045">
Analysis:  n<k
</nierror>
<nierror code="-23044">
Analysis:  Argument out of range [0,1]
</nierror>
<nierror code="-23043">
Analysis:  Argument out of range (0,1]
</nierror>
<nierror code="-23042">
Analysis:  Negative argument
</nierror>
<nierror code="-23041">
Analysis:  Not exactly two variables
</nierror>
<nierror code="-23040">
Analysis:  Derivative out of range
</nierror>
<nierror code="-23039">
Analysis:  Parameter problem
</nierror>
<nierror code="-23038">
Analysis:  No variables in expression
</nierror>
<nierror code="-23037">
Analysis:  Not exactly two functions
</nierror>
<nierror code="-23036">
Analysis:  Different parameters
</nierror>
<nierror code="-23035">
Analysis:  Nonpositive number
</nierror>
<nierror code="-23034">
Analysis:  Ill conditioned system
</nierror>
<nierror code="-23033">
Analysis:  Vectors have different dimensions or empty vectors
</nierror>
<nierror code="-23032">
Analysis:  Maximum does not exist
</nierror>
<nierror code="-23031">
Analysis:  No valid point
</nierror>
<nierror code="-23030">
Analysis:  m >= n >= 0 is violated or the matrix of derivatives has the wrong dimension
</nierror>
<nierror code="-23029">
Analysis:  Levenberg Marquardt has failed
</nierror>
<nierror code="-23028">
Analysis:  Wrong model equation
</nierror>
<nierror code="-23027">
Analysis:  Not exactly one variable
</nierror>
<nierror code="-23026">
Analysis:  No optimum found
</nierror>
<nierror code="-23025">
Analysis:  Nonvalid triplet (a,b,c)
</nierror>
<nierror code="-23024">
Analysis:  No root found
</nierror>
<nierror code="-23023">
Analysis:  Wrong dimension of start
</nierror>
<nierror code="-23022">
Analysis:  Nonpositive accuracy or nonpositive delta x(h)
</nierror>
<nierror code="-23021">
Analysis:  Both function values have the same sign
</nierror>
<nierror code="-23020">
Analysis:  Left point greater than right point
</nierror>
<nierror code="-23019">
Analysis:  Right point is a root
</nierror>
<nierror code="-23018">
Analysis:  Left point is a root
</nierror>
<nierror code="-23017">
Analysis:  Multiple roots
</nierror>
<nierror code="-23016">
Analysis:  Singular eigenvector matrix
</nierror>
<nierror code="-23015">
Analysis:  Empty X0
</nierror>
<nierror code="-23014">
Analysis:  A and X0 have different dimensions
</nierror>
<nierror code="-23013">
Analysis:  Matrix vector conflict
</nierror>
<nierror code="-23012">
Analysis:  Nonpositive accuracy
</nierror>
<nierror code="-23011">
Analysis:  Nonpositive step rate
</nierror>
<nierror code="-23010">
Analysis:  Wrong input, Cash Karp method
</nierror>
<nierror code="-23009">
Analysis:  Wrong input, Runge Kutta method
</nierror>
<nierror code="-23008">
Analysis:  Wrong input, Euler method
</nierror>
<nierror code="-23007">
Analysis:  Not a graphs file
</nierror>
<nierror code="-23006">
Analysis:  Not a valid path
</nierror>
<nierror code="-23005">
Analysis:  Negative distance
</nierror>
<nierror code="-23004">
Analysis:  Number of color palettes out of range
</nierror>
<nierror code="-23003">
Analysis:  Number of contours out of range
</nierror>
<nierror code="-23002">
Analysis:  Discrepancy between function, variables and coordinates
</nierror>
<nierror code="-23001">
Analysis:  Syntax error of parser
</nierror>
<nierror code="-23000">
Analysis:  The starting error codes of engineering math.
</nierror>
<nierror code="-20999">
Analysis:  Serious algorithm failure. Call National Instruments support.
</nierror>
<nierror code="-20511">
Analysis:  CVI Could not create the required mutex.
</nierror>
<nierror code="-20510">
Analysis:  CVI Could not find specified function in the DLL
</nierror>
<nierror code="-20509">
Analysis:  CVI Could not load Spectral Measurement Toolset DLL
</nierror>
<nierror code="-20508">
Analysis:  Invalid SMT session handle
</nierror>
<nierror code="-20507">
Analysis:  Incorrect averaging type specified
</nierror>
<nierror code="-20506">
Analysis:  Incorrect type of the input spectrum data
</nierror>
<nierror code="-20505">
Analysis:  Either FFT bins or RBW must be specified
</nierror>
<nierror code="-20504">
Analysis:  Sampling frequency should be greater than zero.
</nierror>
<nierror code="-20503">
Analysis:  The internal buffer is overflowed by input data
</nierror>
<nierror code="-20502">
Analysis:  FFT Size must be greater than zero
</nierror>
<nierror code="-20501">
Analysis:  The zoom factor must be greater than zero
</nierror>
<nierror code="-20332">
Analysis:  Internal error:  The number of threads attribute is less than zero.  If the problem persists, contact National Instruments technical support.
</nierror>
<nierror code="-20331">
Analysis:  Internal error:  The parameter struct pointer is Null, possibly due to alteration of the calling VI's diagram.  If the problem persists, contact National Instruments technical support.
</nierror>
<nierror code="-20330">
Analysis:  Internal error:  The cursor struct pointer is Null, possibly due to alteration of the calling VI's diagram.  If the problem persists, contact National Instruments technical support.
</nierror>
<nierror code="-20329">
Analysis:  Internal error:  The result pointer is Null, possibly due to alteration of the calling VI's diagram.  If the problem persists, contact National Instruments technical support.
</nierror>
<nierror code="-20328">
Analysis:  Failure initializing a critical section in measurement code, possibly due to low memory.  If the problem persists, contact National Instruments technical support.
</nierror>
<nierror code="-20327">
Analysis:  An exception occurred in the measurement code, possibly due to low memory.  If the problem persists, contact National Instruments technical support.
</nierror>
<nierror code="-20326">
Analysis:  Internal error:  Invalid measurement ID number.  Contact National Instruments technical support.
</nierror>
<nierror code="-20325">
Analysis:  Internal error:  Two measurements share the same ID number.  If the problem persists, contact National Instruments technical support.
</nierror>
<nierror code="-20324">
Analysis:  The edge/cycle/pulse number parameter must be greater than zero.
</nierror>
<nierror code="-20323">
Analysis:  Internal error:  The attribute number does not refer to a valid parameter.  Check the input parameters in "reference levels" and "percent level settings" or "state settings".
</nierror>
<nierror code="-20322">
Analysis:  Internal Error:  The measurement session handle is invalid.  If the problem persists, contact National Instruments technical support.
</nierror>
<nierror code="-20321">
Analysis:  Internal error:  The requested measurement is not available.  If the problem persists, contact National Instruments technical support.
</nierror>
<nierror code="-20320">
Analysis:  The period of the waveform is too short to perform the desired measurement.
</nierror>
<nierror code="-20319">
Analysis:  The result is not a number (NaN) or inifinite.
</nierror>
<nierror code="-20318">
Analysis:  The histogram size parameter is less than or equal to zero.
</nierror>
<nierror code="-20317">
Analysis:  The slew rate is infinite because the rise or fall time is zero.
</nierror>
<nierror code="-20316">
Analysis:  Illegal percent method parameter.  Check the method enum input.
</nierror>
<nierror code="-20315">
Analysis:  The waveform's dt parameter is <= 0.
</nierror>
<nierror code="-20314">
Analysis:  Illegal reference level units parameter.  Check the ref units text ring input.
</nierror>
<nierror code="-20313">
Analysis:  Reference levels must satisfy:  low ref <= mid ref <= high ref.
</nierror>
<nierror code="-20312">
Analysis:  The input waveform size is zero.
</nierror>
<nierror code="-20311">
Analysis:  Insufficient memory is available for waveform measurement.
</nierror>
<nierror code="-20310">
Analysis:  The waveform did not have enough edges to perform this measurement.  An edge is defined as a crossing of both the low and high reference levels.  Check the signal length, reference levels, and ref level units.
</nierror>
<nierror code="-20309">
Analysis:  The amplitude of the waveform is zero, so the histogram method cannot be used.
</nierror>
<nierror code="-20308">
Analysis:  The waveform did not cross the mid reference level enough times to perform this measurement.  Check the signal length, reference levels, and ref level units.
</nierror>
<nierror code="-20307">
Analysis:  Frequency not a multiple of (Sampling Rate)/Samples.
</nierror>
<nierror code="-20306">
Analysis:  The two time signal waveforms contain different dt.
</nierror>
<nierror code="-20305">
Analysis:  The two time signal waveforms contain different number of data points.
</nierror>
<nierror code="-20304">
Analysis:  At least one of the time signal waveforms does not contain the correct dt to continue the averaging process.
</nierror>
<nierror code="-20303">
Analysis:  At least one of the time signal waveforms does not contain the correct number of data points to continue the averaging process.
</nierror>
<nierror code="-20302">
Analysis:  The time signal waveform does not contain the correct dt to continue the averaging process.
</nierror>
<nierror code="-20301">
Analysis:  The time signal waveform does not contain the correct number of data points to continue the averaging process.
</nierror>
<nierror code="-20207">
Analysis:  The upper limit is less than the lower limit.
</nierror>
<nierror code="-20206">
Analysis:  Shifts: n is negative
</nierror>
<nierror code="-20205">
Analysis:  The sample length is less than the window length
</nierror>
<nierror code="-20204">
Analysis:  The window length is not positive
</nierror>
<nierror code="-20203">
Analysis:  The time increment is not positive
</nierror>
<nierror code="-20202">
Analysis:  The sample length is negative
</nierror>
<nierror code="-20201">
Analysis:  The sample length is not positive
</nierror>
<nierror code="-20103">
Analysis:  The order must be positive.
</nierror>
<nierror code="-20102">
Analysis:  The shifts must meet: |shifts| < samples.
</nierror>
<nierror code="-20101">
Analysis:  Parameter must meet the condition: Top>Base
</nierror>
<nierror code="-20099">
Analysis:  The AR order must be greater than or equal to the number of complex sinusoids.
</nierror>
<nierror code="-20098">
Analysis:  The AR order must not be greater than two-thirds of the number of samples.
</nierror>
<nierror code="-20097">
Analysis:  The number of complex sinusoids must not be greater than two thirds of the number of samples.
</nierror>
<nierror code="-20096">
Analysis:  The AR order must be > 0.
</nierror>
<nierror code="-20095">
Analysis:  The number of complex sinusoids must be > 0.
</nierror>
<nierror code="-20094">
Analysis:  The size of the initial or final condition array is not correct.
</nierror>
<nierror code="-20093">
Analysis:  df must be > 0.
</nierror>
<nierror code="-20092">
Analysis:  The dual function does not exist.
</nierror>
<nierror code="-20091">
Analysis:  The Gabor coefficient array does not have the correct dimension.
</nierror>
<nierror code="-20090">
Analysis:  The order of the Gabor spectrogram must be >=0.
</nierror>
<nierror code="-20089">
Analysis:  The oversampling rate, N / dM, must be >=1.
</nierror>
<nierror code="-20088">
Analysis:  The length of the analysis or synthesis window must be evenly divisible by the number of frequency bins, N, which must be a power of 2.
</nierror>
<nierror code="-20087">
Analysis:  The length of the analysis or synthesis window must be evenly divisible by the Gabor time sampling interval, dM.
</nierror>
<nierror code="-20086">
Analysis:  Window length must be > 2 and a power of 2.
</nierror>
<nierror code="-20085">
Analysis:  The size of the input array and its Hilbert transform must be equal.
</nierror>
<nierror code="-20084">
Analysis:  Time increment must not be greater than (window length)/4.
</nierror>
<nierror code="-20083">
Analysis:  Window length must be > 4 and a power of 2.
</nierror>
<nierror code="-20082">
Analysis:  Time increment must not be greater than dM.
</nierror>
<nierror code="-20081">
Analysis:  dN or time interval must be greater than zero.
</nierror>
<nierror code="-20080">
Analysis:  Time increment must be greater than the (window length)/16
</nierror>
<nierror code="-20067">
Analysis:  The input fundamental frequency or sampling rate is equal to zero
</nierror>
<nierror code="-20066">
Analysis:  The information in IIR filter structure is not correct
</nierror>
<nierror code="-20065">
Analysis:  The elements in the vector can not be all zero.
</nierror>
<nierror code="-20064">
Analysis:  The internal memory state of this function was not initialized correctly.
</nierror>
<nierror code="-20063">
Analysis:  The coefficients of the polynomial are invalid.
</nierror>
<nierror code="-20062">
Analysis:  The maximum number of iterations was exceeded.
</nierror>
<nierror code="-20061">
Analysis:  The selection is invalid.
</nierror>
<nierror code="-20060">
Analysis:  Divide by zero error.
</nierror>
<nierror code="-20059">
Analysis:  Negative number error
</nierror>
<nierror code="-20058">
Analysis:  Invalid number of dimensions or dependent variables
</nierror>
<nierror code="-20057">
Analysis:  The parameter to the beta function should be 0 < p < 1
</nierror>
<nierror code="-20056">
Analysis:  The contingency table has a negative number.
</nierror>
<nierror code="-20055">
Analysis:  The number of categories or samples must be greater than one.
</nierror>
<nierror code="-20054">
Analysis:  The probability must be greater than or equal to zero and less than one.
</nierror>
<nierror code="-20053">
Analysis:  The probability must be between zero and one.
</nierror>
<nierror code="-20052">
Analysis:  The degrees of freedom must be one or more.
</nierror>
<nierror code="-20051">
Analysis:  All values in the first column of X matrix must be one.
</nierror>
<nierror code="-20050">
Analysis:  The interpolating function has a pole at the requested value.
</nierror>
<nierror code="-20049">
Analysis:  The x-values must be distinct.
</nierror>
<nierror code="-20048">
Analysis:  The Random Effect model was requested when the Fixed Effect model is required.
</nierror>
<nierror code="-20047">
Analysis:  The data is unbalanced.  All cells must contain the same number of observations.
</nierror>
<nierror code="-20046">
Analysis:  There is an overflow in the calculated F-value for the ANOVA Fit function.
</nierror>
<nierror code="-20045">
Analysis:  The total number of data points must be equal to the product of levels/each factor * observations/cell.
</nierror>
<nierror code="-20044">
Analysis:  Zero observations were made at some level of a factor.
</nierror>
<nierror code="-20043">
Analysis:  The level of factors is outside the allowable range of some data.
</nierror>
<nierror code="-20042">
Analysis:  The number of levels is out of range .
</nierror>
<nierror code="-20041">
Analysis:  The system of equations cannot be solved because the input matrix is singular.
</nierror>
<nierror code="-20040">
Analysis:  The input matrix must be a square matrix.
</nierror>
<nierror code="-20039">
Analysis:  The number of columns in the first matrix is not equal to the number of rows in the second matrix or vector.
</nierror>
<nierror code="-20038">
Analysis:  The number of intervals must be > 0.
</nierror>
<nierror code="-20037">
Analysis:  The number of data points in the Y Values array must be greater than the order.
</nierror>
<nierror code="-20036">
Analysis:  The elements of the Y Values array must be nonzero and either all positive or all negative.
</nierror>
<nierror code="-20035">
Analysis:  The standard deviation must be greater than zero for normalization.
</nierror>
<nierror code="-20034">
Analysis:  The number of coefficients must be even for this filter.
</nierror>
<nierror code="-20033">
Analysis:  The number of coefficients must be odd for this filter.
</nierror>
<nierror code="-20032">
Analysis:  The rank of the filter must meet:  1 <= (2*rank + 1) <= size.
</nierror>
<nierror code="-20031">
Analysis:  The filter cannot be designed with the specified input values.
</nierror>
<nierror code="-20030">
Analysis:  The leakage coefficient, leak, and step-size parameter, u, must meet:  0 <= leak <= u.
</nierror>
<nierror code="-20029">
Analysis:  The step-size, u, must meet:  0 <= u <= 0.1.
</nierror>
<nierror code="-20028">
Analysis:  The attenuation value must be greater than the ripple amplitude.
</nierror>
<nierror code="-20027">
Analysis:  The final value must be > 0.
</nierror>
<nierror code="-20026">
Analysis:  The width must be > 0.
</nierror>
<nierror code="-20025">
Analysis:  The attenuation must be > 0.
</nierror>
<nierror code="-20024">
Analysis:  The ripple amplitude must be > 0.
</nierror>
<nierror code="-20023">
Analysis:  The following conditions must be met:  0 < f_low <= f_high <= fs/2.
</nierror>
<nierror code="-20022">
Analysis:  The decimating factor must meet:  0 < decimating factor <= samples.
</nierror>
<nierror code="-20021">
Analysis:  The order must be > 0.
</nierror>
<nierror code="-20020">
Analysis:  The cut-off frequency, fc, must meet:  0 <= fc <= fs/2.
</nierror>
<nierror code="-20019">
Analysis:  The upper value must be >= the lower value.
</nierror>
<nierror code="-20018">
Analysis:  The following condition must be met:  0 <= (index + length) < samples.
</nierror>
<nierror code="-20017">
Analysis:  The following condition must be met:  0 <= index < samples.
</nierror>
<nierror code="-20016">
Analysis:  dt must be > 0.
</nierror>
<nierror code="-20015">
Analysis:  dt must be >= 0.
</nierror>
<nierror code="-20014">
Analysis:  The following conditions must be met:  0 <= (delay + width) < samples.
</nierror>
<nierror code="-20013">
Analysis:  The width must meet: 0 < width < samples.
</nierror>
<nierror code="-20012">
Analysis:  The number of cycles must be > 0 and <= the number of samples.
</nierror>
<nierror code="-20011">
Analysis:  The duty cycle must be equal to or fall between 0 and 100: 0 <= duty cycle <= 100.
</nierror>
<nierror code="-20010">
Analysis:  The maximum allowable transform size has been exceeded.
</nierror>
<nierror code="-20009">
Analysis:  The size of the input array must be a power of two:  size = 2^m, 0<m<23.
</nierror>
<nierror code="-20008">
Analysis:  The input arrays do not contain the correct number of data values for this function.
</nierror>
<nierror code="-20007">
Analysis:  The number of samples must be >= 3.
</nierror>
<nierror code="-20006">
Analysis:  The number of samples must be >= 2.
</nierror>
<nierror code="-20004">
Analysis:  The number of samples must be >= 0.
</nierror>
<nierror code="-20003">
Analysis:  The number of samples must be >0.
</nierror>
<nierror code="-20002">
Analysis:  The input sequences must be the same size.
</nierror>
<nierror code="-20001">
Analysis:  There is not enough memory to perform the specified routine.
</nierror>
<nierror code="20020">
Analysis:  Some frequencies violate Nyquist criteria.
</nierror>
<nierror code="20351">
Analysis:  The averaging process was automatically restarted to respond to a change in the averaging parameters.
</nierror>
<nierror code="20352">
Analysis:  Current and previous waveforms are not contiguous.
</nierror>
<nierror code="20353">
Analysis:  Current and previous dt not equal.
</nierror>
</nidocument>