<?XML Version="1.0">
<nidocument>
<nicomment>
LabVIEW error file
</nicomment>
<nierror code="-1074397183">
NI-IMAQ:  (Hex 0xBFF60001) <IMG_ERR_NCAP> Function not implemented.
</nierror>
<nierror code="-1074397182">
NI-IMAQ:  (Hex 0xBFF60002) <IMG_ERR_OVRN> Too many interfaces open.
</nierror>
<nierror code="-1074397181">
NI-IMAQ:  (Hex 0xBFF60003) <IMG_ERR_EMEM> Not enough memory to perform the operation.
</nierror>
<nierror code="-1074397180">
NI-IMAQ:  (Hex 0xBFF60004) <IMG_ERR_OSER> Operating system error occurred.
</nierror>
<nierror code="-1074397179">
NI-IMAQ:  (Hex 0xBFF60005) <IMG_ERR_PAR1> Function-specific; see function description.
</nierror>
<nierror code="-1074397178">
NI-IMAQ:  (Hex 0xBFF60006) <IMG_ERR_PAR2> Function-specific; see function description.
</nierror>
<nierror code="-1074397177">
NI-IMAQ:  (Hex 0xBFF60007) <IMG_ERR_PAR3> Function-specific; see function description.
</nierror>
<nierror code="-1074397176">
NI-IMAQ:  (Hex 0xBFF60008) <IMG_ERR_PAR4> Function-specific; see function description.
</nierror>
<nierror code="-1074397175">
NI-IMAQ:  (Hex 0xBFF60009) <IMG_ERR_PAR5> Function-specific; see function description.
</nierror>
<nierror code="-1074397174">
NI-IMAQ:  (Hex 0xBFF6000A) <IMG_ERR_PAR6> Function-specific; see function description.
</nierror>
<nierror code="-1074397173">
NI-IMAQ:  (Hex 0xBFF6000B) <IMG_ERR_PAR7> Function-specific; see function description.
</nierror>
<nierror code="-1074397172">
NI-IMAQ:  (Hex 0xBFF6000C) <IMG_ERR_MXBF> Too many buffers already allocated.
</nierror>
<nierror code="-1074397171">
NI-IMAQ:  (Hex 0xBFF6000D) <IMG_ERR_DLLE> DLL internal error; bad logic state.
</nierror>
<nierror code="-1074397170">
NI-IMAQ:  (Hex 0xBFF6000E) <IMG_ERR_BSIZ> Buffer size used is too small for minimum acquisition frame.
</nierror>
<nierror code="-1074397169">
NI-IMAQ:  (Hex 0xBFF6000F) <IMG_ERR_MXBI> Exhausted buffer IDs.
</nierror>
<nierror code="-1074397168">
NI-IMAQ:  (Hex 0xBFF60010) <IMG_ERR_ELCK> Cannot lock buffers down; no more memory.
</nierror>
<nierror code="-1074397167">
NI-IMAQ:  (Hex 0xBFF60011) <IMG_ERR_DISE> Error releasing the image buffer.
</nierror>
<nierror code="-1074397166">
NI-IMAQ:  (Hex 0xBFF60012) <IMG_ERR_BBUF> Bad buffer pointer in list.
</nierror>
<nierror code="-1074397165">
NI-IMAQ:  (Hex 0xBFF60013) <IMG_ERR_NLCK> Buffer list is not locked.
</nierror>
<nierror code="-1074397164">
NI-IMAQ:  (Hex 0xBFF60014) <IMG_ERR_NCAM> No camera defined for this channel.
</nierror>
<nierror code="-1074397163">
NI-IMAQ:  (Hex 0xBFF60015) <IMG_ERR_BINT> Bad interface.
</nierror>
<nierror code="-1074397162">
NI-IMAQ:  (Hex 0xBFF60016) <IMG_ERR_BROW> Rowbytes is less than region of interest.
</nierror>
<nierror code="-1074397161">
NI-IMAQ:  (Hex 0xBFF60017) <IMG_ERR_BROI> ROI area is larger than the acquisition area.
</nierror>
<nierror code="-1074397160">
NI-IMAQ:  (Hex 0xBFF60018) <IMG_ERR_BCMF> Bad camera file (check syntax).
</nierror>
<nierror code="-1074397159">
NI-IMAQ:  (Hex 0xBFF60019) <IMG_ERR_NVBL> Not successful because of hardware limitations.
</nierror>
<nierror code="-1074397158">
NI-IMAQ:  (Hex 0xBFF6001A) <IMG_ERR_NCFG> Invalid action; no buffers configured for session.
</nierror>
<nierror code="-1074397157">
NI-IMAQ:  (Hex 0xBFF6001B) <IMG_ERR_BBLF> Buffer list does not contain a valid final command.
</nierror>
<nierror code="-1074397156">
NI-IMAQ:  (Hex 0xBFF6001C) <IMG_ERR_BBLE> Buffer list contains an invalid command.
</nierror>
<nierror code="-1074397155">
NI-IMAQ:  (Hex 0xBFF6001D) <IMG_ERR_BBLB> A buffer list buffer is NULL.
</nierror>
<nierror code="-1074397154">
NI-IMAQ:  (Hex 0xBFF6001E) <IMG_ERR_NAIP> No acquisition in progress.
</nierror>
<nierror code="-1074397153">
NI-IMAQ:  (Hex 0xBFF6001F) <IMG_ERR_VLCK> Cannot get lock on video source.
</nierror>
<nierror code="-1074397152">
NI-IMAQ:  (Hex 0xBFF60020) <IMG_ERR_BDMA> Bad DMA transfer.
</nierror>
<nierror code="-1074397151">
NI-IMAQ:  (Hex 0xBFF60021) <IMG_ERR_AIOP> Cannot perform request; acquisition in progress.
</nierror>
<nierror code="-1074397150">
NI-IMAQ:  (Hex 0xBFF60022) <IMG_ERR_TIMO> Wait timed out; acquisition not complete.
</nierror>
<nierror code="-1074397149">
NI-IMAQ:  (Hex 0xBFF60023) <IMG_ERR_NBUF> No buffers available; too early in acquisition.
</nierror>
<nierror code="-1074397148">
NI-IMAQ:  (Hex 0xBFF60024) <IMG_ERR_ZBUF> Zero buffer size; no bytes filled.
</nierror>
<nierror code="-1074397147">
NI-IMAQ:  (Hex 0xBFF60025) <IMG_ERR_HLPR> Bad parameter to low level; check attributes and high level arguments.
</nierror>
<nierror code="-1074397146">
NI-IMAQ:  (Hex 0xBFF60026) <IMG_ERR_BTRG> Trigger loopback problem; cannot drive with action enabled.
</nierror>
<nierror code="-1074397145">
NI-IMAQ:  (Hex 0xBFF60027) <IMG_ERR_NINF> No interface found.
</nierror>
<nierror code="-1074397144">
NI-IMAQ:  (Hex 0xBFF60028) <IMG_ERR_NDLL> Unable to load DLL (LabWindows/CVI only).
</nierror>
<nierror code="-1074397143">
NI-IMAQ:  (Hex 0xBFF60029) <IMG_ERR_NFNC> Unable to find API function in DLL (LabWindows/CVI only).
</nierror>
<nierror code="-1074397142">
NI-IMAQ:  (Hex 0xBFF6002A) <IMG_ERR_NOSR> Unable to allocate system resources (LabWindows/CVI only).
</nierror>
<nierror code="-1074397141">
NI-IMAQ:  (Hex 0xBFF6002B) <IMG_ERR_BTAC> No trigger action; acquisition will time out.
</nierror>
<nierror code="-1074397140">
NI-IMAQ:  (Hex 0xBFF6002C) <IMG_ERR_FIFO> FIFO overflow caused acquisition to halt.
</nierror>
<nierror code="-1074397139">
NI-IMAQ:  (Hex 0xBFF6002D) <IMG_ERR_MLCK> Memory lock error; cannot perform acquisition.
</nierror>
<nierror code="-1074397138">
NI-IMAQ:  (Hex 0xBFF6002E) <IMG_ERR_ILCK> Interface locked.
</nierror>
<nierror code="-1074397137">
NI-IMAQ:  (Hex 0xBFF6002F) <IMG_ERR_NEPK> No external pixel clock.
</nierror>
<nierror code="-1074397136">
NI-IMAQ:  (Hex 0xBFF60030) <IMG_ERR_SCLM> Field scaling mode not supported.
</nierror>
<nierror code="-1074397135">
NI-IMAQ:  (Hex 0xBFF60031) <IMG_ERR_SCC1> Channel not set to 1 when using StillColor RGB acquisition.
</nierror>
<nierror code="-1074397134">
NI-IMAQ:  (Hex 0xBFF60032) <IMG_ERR_SMALLALLOC> Error during small buffer allocation.
</nierror>
<nierror code="-1074397133">
NI-IMAQ:  (Hex 0xBFF60033) <IMG_ERR_ALLOC>  Error during large buffer allocation.
</nierror>
<nierror code="-1074397132">
NI-IMAQ:  (Hex 0xBFF60034) <IMG_ERR_BADCAMTYPE> Bad camera type; camera needs to be of type NTSC or PAL.
</nierror>
<nierror code="-1074397131">
NI-IMAQ:  (Hex 0xBFF60035) <IMG_ERR_BADPIXTYPE>  Camera not supported; must be an 8-bit camera.
</nierror>
<nierror code="-1074397130">
NI-IMAQ:  (Hex 0xBFF60036) <IMG_ERR_BADCAMPARAM>  Bad camera parameter in configuration file.
</nierror>
<nierror code="-1074397129">
NI-IMAQ:  (Hex 0xBFF60037) <IMG_ERR_PALKEYDTCT>  PAL key detection error.
</nierror>
<nierror code="-1074397128">
NI-IMAQ:  (Hex 0xBFF60038) <IMG_ERR_BFRQ> Bad frequency values.
</nierror>
<nierror code="-1074397127">
NI-IMAQ:  (Hex 0xBFF60039) <IMG_ERR_BITP> Bad interface type.
</nierror>
<nierror code="-1074397126">
NI-IMAQ:  (Hex 0xBFF6003A) <IMG_ERR_HWNC> Hardware not capable of supporting this function.
</nierror>
<nierror code="-1074397125">
NI-IMAQ:  (Hex 0xBFF6003B) <IMG_ERR_SERIAL> Serial port error.
</nierror>
<nierror code="-1074397124">
NI-IMAQ:  (Hex 0xBFF6003C) <IMG_ERR_MXPI> Exhausted pulse IDs.
</nierror>
<nierror code="-1074397123">
NI-IMAQ:  (Hex 0xBFF6003D) <IMG_ERR_BPID> Bad pulse ID.
</nierror>
<nierror code="-1074397122">
NI-IMAQ:  (Hex 0xBFF6003E) <IMG_ERR_NEVR> DLL internal error; bad logic state.
</nierror>
<nierror code="-1074397121">
NI-IMAQ:  (Hex 0xBFF6003F) <IMG_ERR_SERIAL_TIMO>  Serial transmit/receive timeout.
</nierror>
<nierror code="-1074397120">
NI-IMAQ:  (Hex 0xBFF60040) <IMG_ERR_PG_TOO_MANY> Too many pattern generation transitiions defined.
</nierror>
<nierror code="-1074397119">
NI-IMAQ:  (Hex 0xBFF60041) <IMG_ERR_PG_BAD_TRANS> Bad pattern generation transition time.
</nierror>
<nierror code="-1074397118">
NI-IMAQ:  (Hex 0xBFF60042) <IMG_ERR_PLNS> Pulse not started.
</nierror>
<nierror code="-1074397117">
NI-IMAQ:  (Hex 0xBFF60043) <IMG_ERR_BPMD> Bad pulse mode.
</nierror>
<nierror code="-1074397116">
NI-IMAQ:  (Hex 0xBFF60044) <IMG_ERR_NSAT> Nonsettable attribute.
</nierror>
<nierror code="-1074397115">
NI-IMAQ:  (Hex 0xBFF60045) <IMG_ERR_HYBRID> Cannot mix system and onboard memory buffers.
</nierror>
<nierror code="-1074397114">
NI-IMAQ:  (Hex 0xBFF60046) <IMG_ERR_BADFILFMT> Pixel depth not supported with this file format.
</nierror>
<nierror code="-1074397113">
NI-IMAQ:  (Hex 0xBFF60047) <IMG_ERR_BADFILEXT> File extension not supported.
</nierror>
<nierror code="-1074397112">
NI-IMAQ:  (Hex 0xBFF60048) <IMG_ERR_NRTSI> Too many RTSI triggers mapped; you can use only four RTSI lines at once.
</nierror>
<nierror code="-1074397111">
NI-IMAQ:  (Hex 0xBFF60049) <IMG_ERR_MXTRG>  Exhausted trigger resources.
</nierror>
<nierror code="-1074397110">
NI-IMAQ:  (Hex 0xBFF6004A) <IMG_ERR_MXRC> Exhausted resources (general).
</nierror>
<nierror code="-1074397109">
NI-IMAQ:  (Hex 0xBFF6004B) <IMG_ERR_OOR> Parameter out of range.
</nierror>
<nierror code="-1074397108">
NI-IMAQ:  (Hex 0xBFF6004C) <IMG_ERR_NPROG> FPGA not programmed.
</nierror>
<nierror code="-1074397107">
NI-IMAQ:  (Hex 0xBFF6004D) <IMG_ERR_NEOM> Not enough onboard memory to perform the operation.
</nierror>
<nierror code="-1074397106">
NI-IMAQ:  (Hex 0xBFF6004E) <IMG_ERR_BDTYPE> Bad display type; buffer cannot be displayed with imgPlot.
</nierror>
<nierror code="-1074397105">
NI-IMAQ:  (Hex 0xBFF6004F) <IMG_ERR_THRDACCDEN> Thread denied access to function.
</nierror>
<nierror code="-1074397104">
NI-IMAQ:  (Hex 0xBFF60050) <IMG_ERR_BADFILWRT> Could not write the file.
</nierror>
<nierror code="-1074397103">
NI-IMAQ:  (Hex 0xBFF60051) <IMG_ERR_AEXM>  Already called ExamineBuffer once; call ReleaseBuffer.
</nierror>
<nierror code="-1074397072">
NI-IMAQ:  (Hex 0xBFF60070) <IMG_MUX_ERR_CAM_NUM_NOT_VALID> Invalid camera number.
</nierror>
<nierror code="-1074397071">
NI-IMAQ:  (Hex 0xBFF60071) <IMG_MUX_ERR_INVALID_SESSION_ID> Invalid session identifier.
</nierror>
<nierror code="-1074397070">
NI-IMAQ:  (Hex 0xBFF60072) <IMG_MUX_ERR_SESSION_NOT_CONFIGURED> Multiplexer has not been configured for the current session.
</nierror>
<nierror code="-1074397069">
NI-IMAQ:  (Hex 0xBFF60073) <IMG_MUX_ERR_SELECT_IS_EXT_CONTROLLED> Multiplexer is configured for external camera selection.
</nierror>
<nierror code="-1074397068">
NI-IMAQ:  (Hex 0xBFF60074) <IMG_MUX_ERR_UNSUPPORTED_ATTR> Unsupported attribute type.
</nierror>
<nierror code="-1074397067">
NI-IMAQ:  (Hex 0xBFF60075) <IMG_MUX_ERR_UNSUPPORTED_ATTR_VAL> Unsupported attribute value.
</nierror>
<nierror code="-1074397066">
NI-IMAQ:  (Hex 0xBFF60076) <IMG_MUX_ERR_UNSUPPORTED_LUT_TYPE> Unsupported LUT type.
</nierror>
<nierror code="-1074397065">
NI-IMAQ:  (Hex 0xBFF60077) <IMG_MUX_ERR_LEFT_OFFSET_DEFINED> The acquisition window has a left offset that is greater than zero.
</nierror>
<nierror code="-1074397064">
NI-IMAQ:  (Hex 0xBFF60078) <IMG_MUX_ERR_CAMERA0_INIT> An error occurred initializing camera 0.
</nierror>
<nierror code="-1074397063">
NI-IMAQ:  (Hex 0xBFF60079) <IMG_MUX_ERR_CAMERA1_INIT> An error occurred initializing camera 1.
</nierror>
<nierror code="-1074397062">
NI-IMAQ:  (Hex 0xBFF6007A) <IMG_MUX_ERR_CAMERA2_INIT> An error occurred initializing camera 2.
</nierror>
<nierror code="-1074397061">
NI-IMAQ:  (Hex 0xBFF6007B) <IMG_MUX_ERR_CAMERA3_INIT>An error occurred initializing camera 3.
</nierror>
<nierror code="-1074397060">
NI-IMAQ:  (Hex 0xBFF6007C) <IMG_MUX_ERR_CAMERA0_SERIAL> A serial port error occurred trying to communicate with camera 0.
</nierror>
<nierror code="-1074397059">
NI-IMAQ:  (Hex 0xBFF6007D) <IMG_MUX_ERR_CAMERA1_SERIAL> A serial port error occurred trying to communicate with camera 1.
</nierror>
<nierror code="-1074397058">
NI-IMAQ:  (Hex 0xBFF6007E) <IMG_MUX_ERR_CAMERA2_SERIAL> A serial port error occurred trying to communicate with camera 2.
</nierror>
<nierror code="-1074397057">
NI-IMAQ:  (Hex 0xBFF6007F) <IMG_MUX_ERR_CAMERA3_SERIAL> A serial port error occurred trying to communicate with camera 3.
</nierror>
<nierror code="1073086465">
NI-IMAQ:  (Hex 0x3FF60001) <IMG_WRN_BCAM> Warning; corrupt camera file detected.
</nierror>
<nierror code="1073086466">
NI-IMAQ:  (Hex 0x3FF60002) <IMG_WRN_CONF> Warning; change requires reconfigure to take effect.
</nierror>
<nierror code="1073086467">
NI-IMAQ:  (Hex 0x3FF60003) <IMG_WRN_ILCK> Warning; interface still locked.
</nierror>
<nierror code="1073086468">
NI-IMAQ:  (Hex 0x3FF60004) <IMG_WRN_BLKG>  Warning; unstable blanking reference (Still Color mode).
</nierror>
<nierror code="1073086469">
NI-IMAQ:  (Hex 0x3FF60005) <IMG_WRN_BRST>  Warning; bad quality colorburst (Still Color mode).
</nierror>
<nierror code="1073086470">
NI-IMAQ:  (Hex 0x3FF60006) <IMG_WRN_OATTR> Warning; old attribute used.
</nierror>
<nierror code="1073086471">
NI-IMAQ:  (Hex 0x3FF60007) <IMG_WRN_WLOR > Warning; white level out of range.
</nierror>
</nidocument>