<?XML Version="1.0">
<nidocument>
<nicomment>
LabVIEW error file
</nicomment>
<nierror code="-4399">
NI-VXI:  NI-VXI library system error.
</nierror>
<nierror code="-4302">
NI-VXI:  Invalid extender.
</nierror>
<nierror code="-4301">
NI-VXI:  Unsupported VI; no hardware support.
</nierror>
<nierror code="-4299">
NI-VXI:  NI-VXI library system error.
</nierror>
<nierror code="-4203">
NI-VXI:  Handler timed out.
</nierror>
<nierror code="-4202">
NI-VXI:  Invalid controller.
</nierror>
<nierror code="-4201">
NI-VXI:  No hardware support for this operation.
</nierror>
<nierror code="-4199">
NI-VXI:  NI-VXI library system error.
</nierror>
<nierror code="-4119">
NI-VXI:  Handler timed out.
</nierror>
<nierror code="-4118">
NI-VXI:  Line not configured for external SEMI_SYNC.
</nierror>
<nierror code="-4117">
NI-VXI:  No trigger sensed.
</nierror>
<nierror code="-4116">
NI-VXI:  Previous acknowledge still pending.
</nierror>
<nierror code="-4115">
NI-VXI:  Previous operation incomplete or previous tick configured and enabled.
</nierror>
<nierror code="-4112">
NI-VXI:  Line or counter not configured or initialized.
</nierror>
<nierror code="-4111">
NI-VXI:  Already mapped, must use UnMapTrigToTrig.
</nierror>
<nierror code="-4110">
NI-VXI:  Invalid configuration.
</nierror>
<nierror code="-4109">
NI-VXI:  DestTrig not supported.
</nierror>
<nierror code="-4108">
NI-VXI:  SrcTrig not supported.
</nierror>
<nierror code="-4107">
NI-VXI:  Line already in use.
</nierror>
<nierror code="-4106">
NI-VXI:  Timeout occurred.
</nierror>
<nierror code="-4105">
NI-VXI:  Protocol not supported.
</nierror>
<nierror code="-4104">
NI-VXI:  Line not supported.
</nierror>
<nierror code="-4103">
NI-VXI:  Invalid line or protocol.
</nierror>
<nierror code="-4102">
NI-VXI:  Invalid controller.
</nierror>
<nierror code="-4101">
NI-VXI:  Unsupported VI; no hardware support.
</nierror>
<nierror code="-4099">
NI-VXI:  NI-VXI library system error.
</nierror>
<nierror code="-4006">
NI-VXI:  Handler timed out.
</nierror>
<nierror code="-4005">
NI-VXI:  VXI interrupt still pending from previous AssertVXIint VI or invalid modes.
</nierror>
<nierror code="-4004">
NI-VXI:  Bus error occurred during IACK cycle.
</nierror>
<nierror code="-4003">
NI-VXI:  Invalid interrupt level.
</nierror>
<nierror code="-4002">
NI-VXI:  Invalid controller.
</nierror>
<nierror code="-4001">
NI-VXI:  Invalid interrupt level.
</nierror>
<nierror code="-4001">
NI-VXI:  No hardware support for this operation.
</nierror>
<nierror code="-3999">
NI-VXI:  NI-VXI library system error.
</nierror>
<nierror code="-3903">
NI-VXI:  Handler timed out.
</nierror>
<nierror code="-3902">
NI-VXI:  Invalid logical address.
</nierror>
<nierror code="-3902">
NI-VXI:  Timeout occurred while waiting for a signal to arrive that matches the specified signal mask.
</nierror>
<nierror code="-3901">
NI-VXI:  Invalid logical address.
</nierror>
<nierror code="-3901">
NI-VXI:  The signal was not queued/dequeued because the signal queue is full/empty.
</nierror>
<nierror code="-3899">
NI-VXI:  NI-VXI library system error.
</nierror>
<nierror code="-3805">
NI-VXI:  Invalid direction.
</nierror>
<nierror code="-3802">
NI-VXI:  Local CPU is A16 only.
</nierror>
<nierror code="-3801">
NI-VXI:  Memory operation failed.
</nierror>
<nierror code="-3799">
NI-VXI:  NI-VXI library system error.
</nierror>
<nierror code="-3709">
NI-VXI:  Access width not supported.
</nierror>
<nierror code="-3704">
NI-VXI:  Invalid access width.
</nierror>
<nierror code="-3703">
NI-VXI:  Invalid address.
</nierror>
<nierror code="-3701">
NI-VXI:  Unsupported VI; Not a Slot 0 device.
</nierror>
<nierror code="-3701">
NI-VXI:  Bus error occurred during access.
</nierror>
<nierror code="-3699">
NI-VXI:  NI-VXI library system error.
</nierror>
<nierror code="-3609">
NI-VXI:  Width not supported.
</nierror>
<nierror code="-3608">
NI-VXI:  Timeout; DMA abort error.
</nierror>
<nierror code="-3607">
NI-VXI:  Privilege not supported
</nierror>
<nierror code="-3606">
NI-VXI:  Specified offset or address is not accessible from this hardware.
</nierror>
<nierror code="-3605">
NI-VXI:  Byte order not supported.
</nierror>
<nierror code="-3604">
NI-VXI:  Invalid access width.
</nierror>
<nierror code="-3603">
NI-VXI:  Invalid register or address.
</nierror>
<nierror code="-3602">
NI-VXI:  Invalid access, source or destination parameters.
</nierror>
<nierror code="-3601">
NI-VXI:  Bus error occurred during access.
</nierror>
<nierror code="-3599">
NI-VXI:  NI-VXI library system error.
</nierror>
<nierror code="-3510">
NI-VXI:  Base address change is not supported.
</nierror>
<nierror code="-3509">
NI-VXI:  Window does not have owner access privileges.
</nierror>
<nierror code="-3508">
NI-VXI:  Timeout (window still in use; must use UnMapVXIAddress).
</nierror>
<nierror code="-3507">
NI-VXI:  Privilege not supported.
</nierror>
<nierror code="-3506">
NI-VXI:  Specified offset is not accessible from this hardware.
</nierror>
<nierror code="-3505">
NI-VXI:  Byte order not supported.
</nierror>
<nierror code="-3503">
NI-VXI:  Invalid field.
</nierror>
<nierror code="-3503">
NI-VXI:  Invalid address.
</nierror>
<nierror code="-3502">
NI-VXI:  Invalid input parameter.
</nierror>
<nierror code="-3501">
NI-VXI:  Invalid window number.
</nierror>
<nierror code="-3501">
NI-VXI:  Unsupported VI; no hardware support.
</nierror>
<nierror code="-3499">
NI-VXI:  NI-VXI library system error.
</nierror>
<nierror code="-3403">
NI-VXI:  Handler timed out.
</nierror>
<nierror code="-3402">
NI-VXI:  Unable to perform operation (operation in progress).
</nierror>
<nierror code="-3401">
NI-VXI:  Word Serial servant VI not supported.
</nierror>
<nierror code="-3399">
NI-VXI:  NI-VXI library system error.
</nierror>
<nierror code="-3318">
NI-VXI:  Handler timed out.
</nierror>
<nierror code="-3317">
NI-VXI:  Violation of raw write protocol occurred during transfer.
</nierror>
<nierror code="-3316">
NI-VXI:  Violation of raw read protocol occurred during transfer.
</nierror>
<nierror code="-3315">
NI-VXI:  Device reported an output protocol error during transfer.
</nierror>
<nierror code="-3314">
NI-VXI:  Device reported an input protocol error during transfer.
</nierror>
<nierror code="-3313">
NI-VXI:  Read protocol error.
</nierror>
<nierror code="-3312">
NI-VXI:  Device did not recognize the command.
</nierror>
<nierror code="-3311">
NI-VXI:  Timeout occurred during transfer.
</nierror>
<nierror code="-3310">
NI-VXI:  Bus error occurred during transfer.
</nierror>
<nierror code="-3309">
NI-VXI:  Multiple query error occurred during transfer.
</nierror>
<nierror code="-3308">
NI-VXI:  Invalid logical address.
</nierror>
<nierror code="-3307">
NI-VXI:  Forced user abort occurred during transfer.
</nierror>
<nierror code="-3305">
NI-VXI:  Timeout occurred before response was received.
</nierror>
<nierror code="-3304">
NI-VXI:  Timeout occurred before command was sent.
</nierror>
<nierror code="-3303">
NI-VXI:  Error occurred  opening or accessing the specified file.
</nierror>
<nierror code="-3302">
NI-VXI:  Invalid abortop.
</nierror>
<nierror code="-3301">
NI-VXI:  Invalid logical address.
</nierror>
<nierror code="-3299">
NI-VXI:  NI-VXI library system error.
</nierror>
<nierror code="-3203">
NI-VXI:  Dynamic memory allocation failure.
</nierror>
<nierror code="-3202">
NI-VXI:  Invalid field.
</nierror>
<nierror code="-3202">
NI-VXI:  Logical address out of range 0 to 511.
</nierror>
<nierror code="-3201">
NI-VXI:  Device not found.
</nierror>
<nierror code="-3201">
NI-VXI:  Device already exists.
</nierror>
<nierror code="-3199">
NI-VXI:  NI-VXI library system error.
</nierror>
<nierror code="-3101">
NI-VXI:  NI-VXI library termination failed.
</nierror>
<nierror code="-3099">
NI-VXI:  NI-VXI library system error.
</nierror>
<nierror code="-3001">
NI-VXI:  NI-VXI library initialization failed.
</nierror>
<nierror code="3001">
NI-VXI:  VXI library already initialized (repeat call).
</nierror>
<nierror code="3002">
NI-VXI:  NI-VXI library successfully initialized, but the Resource Manager failed to run successfully.
</nierror>
<nierror code="3003">
NI-VXI:  NI-VXI library successfully initialized, but the Resource Manager has not been run.
</nierror>
<nierror code="3101">
NI-VXI:  Success; previous InitVXIlibrary calls still pending.
</nierror>
<nierror code="3303">
NI-VXI:  Transfer completed successfully, and at least one of the specified termination conditions was received.
</nierror>
<nierror code="3305">
NI-VXI:  Transfer completed successfully, and the specified number of bytes were transferred.
</nierror>
<nierror code="3307">
NI-VXI:  Transfer completed successfully, the specified number of bytes were read, and at least one of the specified termination conditions was received.
</nierror>
<nierror code="3308">
NI-VXI:  Transfer aborted because the device was not ready.
</nierror>
<nierror code="3319">
NI-VXI:  Transfer completed successfully, and the END bit was received.
</nierror>
<nierror code="3323">
NI-VXI:  Transfer completed successfully, the specified number of bytes were read, and the END bit was received.
</nierror>
<nierror code="3335">
NI-VXI:  Transfer completed successfully , and the termination character was received.
</nierror>
<nierror code="3339">
NI-VXI:  Transfer completed successfully, the specified number of bytes were read, and the termination character was received.
</nierror>
<nierror code="3351">
NI-VXI:  Transfer completed successfully, and both the termination character and the END bit were received.
</nierror>
<nierror code="3355">
NI-VXI:  Transfer completed successfully, the specified number of bytes were read, and both the termination character and the END bit were received.
</nierror>
<nierror code="3401">
NI-VXI:  Operation posted successfully, will begin after WSSenable.
</nierror>
<nierror code="3401">
NI-VXI:  Proterr ignored because previous error was pending.
</nierror>
<nierror code="3501">
NI-VXI:  Window accessor was released, but the hardware window is still mapped due to multiple users.
</nierror>
<nierror code="3501">
NI-VXI:  Successful; byte order set the same for all windows.
</nierror>
<nierror code="3801">
NI-VXI:  Memory allocation successful, but memoy must be accessed using VXImemCopy.
</nierror>
<nierror code="3901">
NI-VXI:  Signal queue full, will enable after a SignalDeq.
</nierror>
<nierror code="4001">
NI-VXI:  Signal queue full, will enable interrupts after a SignalDeq.
</nierror>
</nidocument>